The Ultimate Guide On How To Start At The Gym

NB: This article is obsolete, use the Two-set 1RM prediction method instead of the calculator mentioned below.

This article will intentionally not be very comprehensive due to the vast amount of information available online. I will therefore insist on what I NEVER find on workout websites.


SUMMARY

  1. THE GYM TOUR

  2. MOTIVATION: HAVE PRECISE OBJECTIVES

  3. DOCUMENT THE EXERCISES

  4. SPECIAL: WHAT WEIGHTS TO START WITH?

  5. HAVE A PROGRAM AND LOG

  6. NUTRITION: Conditions 90% of your workout’s results

  7. ADOPT A HEALTHY LIFESTYLE


THE GYM TOUR

If you hit a gym where you know no one, just approach the oldest person you see and ask them to show you around the machines and the weights. People at the gym are very friendly and often very willing to share their knowledge. The older are more likely to be wise and documented, so by choosing them you might learn right away how to do things properly. Okay, now that you know the machines…

HAVE PRECISE AND REALISTIC OBJECTIVES

What do you want ? Lose fat ? (In this case your only friend at the gym with be the treadmill and bike, forget about the weights) You want a full body workout or want to focus on some parts only ?  What body type are you ? This will condition how fast you gain muscle and how easy it will be to maintain low fat. What is your budget ? Because most gyms have a fee and you may want to supplement your nutrition or buy better foods. Think very well about what you expect from your gym presence, and how much time you are willing to give to it. A workout session can range from 30 minutes to two hours, and people workout from once to 6 times a week in extreme cases. To begin softly, twice a week should be fine, after a while question it and adapt your workout frequency to your objectives and availabilities.

Having clear objectives is the base for motivation.And motivation, when added to discipline, is the base for success.

DOCUMENT THE EXERCISES

Now that you know what you want and know the machines and weights, you need to figure out what exercises will make your selected body parts work out.
For this purpose, I will not say more than Youtube and Google are your friends.

Basic vocabulary: Exercise, Set, Repetition.
An exercise defines the position and the gesture that you are going to make. Given an exercise, you can do several sets. A set, as its names suggests, is a series of repetitions that you do in a row without stopping. A repetition is the combination of one flexion and one extension. So if I say “Flat Benchpress, 30kg 3×8” the exercise is “flat benchpress”, the bar + weights will overall weight 30kg, and you will do 3 sets of 8 repetitions (reps) each.

Be curious, learn how the body is made and learn what a good posture is. When you selected your exercises for your personal workout, you need to figure out…

WHAT WEIGHTS TO START WITH?

This is precisely the part I will insist on because it is under-documented. It remains however of major importance for you not to hurt yourself, and above all make progress.

Many people (even educated ones…) just lift weights and have not yet understood that there is some elementary chemistry and engineering that rule a workout’s success, and that MUST be understood. Otherwise, it is the same as pressing random buttons on a cockpit; you know it may do something, but you have no idea what it does…

Now back to WHAT WEIGHTS SHOULD I START WITH?
Nothing makes me angrier than websites or forums that answer this question in this fashion: “For biceps beginners should start with 8kgs” .
NO, NO, NO and NO.
Everybody, or shall I say every body is different. From a person to another, different muscular masses can be observed. But even two persons with the same profile may not have the same aptitudes.

My point is : YOU NEED TO FIND OUT THE WEIGHTS WILL WORK FOR YOU.

Your next question would be “Okay, and HOW EXACTLY am I supposed to ‘find out’ ?”. Well, that is the very question I want to answer today.

You need to figure out your 1RM.
What is that?

The 1RM method is that thing everyone talks about on the net, without ever suggesting it to beginners which is why I am doing it today.

1RM means One Repetition Max. It is the maximum weight that exhausts you after one complete repetition. In other words, with your 1RM weight, you can do one repetition but absolutely not two. This state of muscular exhaustion is often called failure, concentric failure or point of failure. The 1RM weight will trace your progress, and will be the reference for you to vary the weight within your program.

Of course, there are as many 1RM weight values as there are combinations of people and exercises.

In practice, the only big problem is that pulling your 1RM weight can be dangerous, especially for beginners. It is indeed very straining and harmful if you are not well prepared or if do it too often. Hopefully, there is a safe method to figure your 1RM weight out based on your ability with lighter weights.

Here is the method I suggest to find safely what weight to start with:

  1. Take the smallest weight you can find for this exercise or machine.
    It may be way too light for you but do it for these 2 reasons: it not too heavy so it’s safe anyway, and it will warm you up, which will improve your later performance.
  2. If you can do 10 reps and feel you can do more just stop at 10.
  3. Rest 5 minutes, double the last poundage, and repeat Step 2 until you reach your point of failure in less than 10 reps.
  4. For the set that brought you to failure in less than 10 reps, write down the weight used and the corresponding number of reps.
  5. Now enter them in this 1RM calculator.

Congratulations! Now you know what weights to start with.

This method, although safer than using directly your 1RM weight, may cause muscle pain if you do not do this : Remember to WARM UP BEFORE (all the mucles that going to work), and stretch them all AFTER. Do it well and do take the time it needs or you will be sorry. A pill of magnesium after your workout will help avoiding muscle soreness. A rather ectomorphic friend has accepted to experiment this method he was fine because he did so.

Last advice:

Don’t reach failure too often or it will be counter-productive. There should be at least two full days (48 hours) before your muscles can sufficiently recover from the last concentric failure. Muscle fibers are destroyed in a workout, creating new muscle while recovering. If you don’t let it recover enough you will destroy more than you create, resulting sometimes in muscle mass and performance decrease rather than the intended increase.

HAVE A PROGRAM AND LOG

If you want to maximize the efficiency for a workout you need to set a clear program.

A good workout program will:

  1. INCLUDE PRE AND POST WORKOUT WARMING UP ONLY BEFORE / STRETCHING ONLY AFTER.
  2. Allow you to rest. The muscle is built during your rests and sleep, not at the gym. Working out is like those things that don’t work anymore if you do too much of them.
  3. Increase Intensity (= heavier weights). Many people at the gym keep the same weights and have their little routine. It allows no progress because their body has no reason to create muscle since it has enough muscle for the task you got it used to. Constantly force your body to go beyond what it already can handle. It may seem like you reach limits, but often times we’re standing far behind them. Do more reps, then add weight and so on [1][3].
  4. Be logged. Keep a journal of what you do. This way you will have all you need to change exercises and poundage. It will also display your progress. For this latter purpose I also suggest taking pictures! Because your weight may not show your progress. Typically, you can loose fat and gain muscle at the same time, have the exact same weight as initially, but you may look a lot more sculpted. So do take pictures even if you are not a big fan of them, they may raise your motivation to higher heights.[3]
  5. Change exercises every now and then to attack your muscles differently [2]. Subsequently it will also keep your motivation up by putting some new spices in your workout.
  6. FOR INTERMEDIATES : Alternate different poundage. It does not sound logical at first sight but established research and experiments show that maximum gains are observed when a bodybuilder engages in some easy and medium workouts, alternating them with heavy workouts.

NUTRITION

Looking ripe is the combination of two things:

  1. ABOVE ALL : LOW BODY FAT, too often neglected.
  2. High Muscle Mass.

Forget about supplements, it is just rushing and probably taking risks to try and MAYBE get what you are sure to get safely if you keep it easy and do things properly. Unless you really know everything about them. Otherwise I suggest you read this post On Supplementing.

Working out is the science of Strength and Conditioning. It is not sitting down, pulling random weights and swallowing random magic products. The results will be the combination of how smartly you behave at the gym, and more importantly how you behave OUTSIDE THE GYM. Read my article on nutrition.

ADOPT A HEALTHY LIFESTYLE

To maximize the efficiency and encourage faster and better results, you may need to scan your lifestyle for removal of bad habits. Learn how to have the best possible sleep. A good sleep is indeed of tremendous importance as it is a key period of the recovery of your body. Muscle mass creation is in fact a recovery process from the workout. Alcohol, tobacco and drugs (even the soft ones) will also affect your workouts results in a negative way. I really look at being ripe as a health concept more than something purely aesthetic. You look healthy with those visible muscles but unlike a bunch of those monkeys at the gym try to focus also on actually BEING healthy. When you’ll be old and ugly at least you’ll have health left 🙂

—–
Sources:
[1] Strength Assessment, Matt Brzycki, coordinator of health, fitness, strength and conditioning programs at Princeton University.

[2] Restimulating Progress by changing exercices, ExRx.net

[3] Shorthand Log, Exrx.net